TMULD-300 Ultrasonic Leak Detector

TMULD-300 Ultrasonic Leak Detector Review

Amprobe TMULD-300 Ultrasonic Leak Detector 2731543 Leak Detector Kit When leaks occur they often generate an ultrasonic frequency that is beyond hum

SPX Industrial TIF8800X Combustible Gas Detector

SPX Industrial TIF8800X Combustible Gas Detector Review

SPX Industrial TIF8800X Combustible Gas Detector Feature

• LED leak level indicator
• Battery status indicator
• Protective rubber boot
• Rechargeable battery and charger
• Flexible 14" wand for hard to reach places

Applications include: Gas lines and pipes, aids in identifying Heat Exchanger leaks and hazardous living/working environments (Note: NOT an effective Carbon Monoxide detector - see TIF-8500A). Ultimate sensitivity as low as 1 ppm (gasoline). Adjustable sensitivity, instantaneous response and automatic warm up. Audible "Geiger counter" type signal. UL, CE and MSHA approved. Detects dangerous explosive gases and is used in almost any situation where combustible gases vapor or residues need to be found. Includes padded nylon carrying case.

Fieldpiece Heated Diode Refrigerant Leak Detector - SRL8

Fieldpiece Heated Diode Refrigerant Leak Detector - SRL8 Review

Fieldpiece Heated Diode Refrigerant Leak Detector - SRL8 Feature

• Triggers on all CFCs, HFCs, HCFCs and blends. More sensitive to some refrigerants than others.
• 15-hour rechargeable, user replaceable battery. It lasts almost two full workdays on a single charge (if your hunting down leaks all day). You can also use it while it's hooked up to the wall or vehicle charger.
• Filter system helps protect the sensor from moisture and other contaminants. The sensor is connected to the body at the other end of the snout. The filter is at the tip of the snout. If you accidentally hit some condensation or oil, the filter swells, shutting off the pull to the sensor and protecting it from failure.
• Manual or automatic zeroing. It auto zeros every two seconds until a leak triggers the sensor. After that you can manually zero the detector to help further pinpoint leaks.
• Up and running in 30 seconds. Some heated elements and corona discharge units take much more time to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.

The SRL8 heated diode refrigerant leak detector triggers on absolute concentration of refrigerant present. Meaning, the closer you get to the leak, the more intensely it will trigger on both the LED display and audio alerts. It zeroes out automatically or can be adjusted manually to zero in on leaks. Simply turn it on, manually or automatically zero, adjust the sensitivity to the desired level and begin testing.

Sonin 50211 Rapitest 10% to 28% Pinless Analog Wood, Concrete, Plaster, Carpet, and More Moisture Meter

Sonin 50211 Rapitest 10% to 28% Pinless Analog Wood, Concrete, Plaster, Carpet, and More Moisture Meter Review

Sonin 50211 Rapitest 10% to 28% Pinless Analog Wood, Concrete, Plaster, Carpet, and More Moisture Meter Feature

• Portable moisture test meter; probes at end of 3-foot cable for difficult-to-read measurements
• Measures moisture from 10 to 28%; test hard/soft wood, concrete, plaster, carpet, and more
• Rugged plastic housing
• Includes meter and probes; 9-volt battery not included
• 1-pound; 1-year warranty

Contact probes are on a 3-foot coiled cable for detecting moisture in hard to reach spots.

The 10-point scale corresponds to moisture levels from 10 to 28%. Scale and reference chart correlate relative and moisture percentage readings.

Requires one 9-volt battery (not included).

Instruction sheet included

Great for inspectors, contactors, and homeowners

Find out if potentially damaging excess moisture is present

Test hard or soft wood, concrete, plaster, carpet, and more to determine the extent of moisture problems.

Locate and trace roof leaks and water seepage; assess the extent of wet rot and hidden condensation.

Use it to check surfaces before painting, wallpapering, or laying floors or tile.

Helps you to select drier lumber.

Contact probes are on a 3-foot coiled cable for testing in hard to reach spots.

Dual reading scale gives relative (1 to 10) and moisture percentages (10 to 28%) readings

Requires one 9-volt battery (not included).

Instruction sheet included

1-year warranty

Pocket Gas Detector

Pocket Gas Detector Review

Pocket Gas Detector Feature

• Detects - Natural Gas & Compressed Natural Gas (CNG)
• Methane & LPG (Propane)
• Butane
• Liquid Natural Gas (LNG)
• Liquid Petroleum Gas (LPG)

This handy pocket size gas detector finds gas keaks in your home, RV, boat, workshop, barbecue grill and wherever gas exists. Runs on 2 AA batteries (not included)

Mastercool Electronic Leak Detector with Brass Gauge Set - MSC55100-R-KIT

Mastercool Electronic Leak Detector with Brass Gauge Set - MSC55100-R-KIT Review

Features and Benefits:

• A/C combo kit with electronic leak detector
• Electronic leak detector detects all refrigerants as low as 1/10 oz per year
• 134A Brass manifold gauge set with manual couplers
• SAE approved 60" set of hoses
• Packaged in plastic box with  85530 3 in 1 can tap

A/C combo kit that includes Electronic leak detector, brass manifold gauge set, hoses and manual couplers.

General Tools MLD290 Microwave Leakage Detector

General Tools MLD290 Microwave Leakage Detector Review

General Tools MLD290 Microwave Leakage Detector Feature

• Wand allows leak detection in small areas
• Numeric and colored scales
• No battery needed

Microwave Leakage Detector.

William Harvey #039375 MP8OZ Gas Leak Detector

William Harvey #039375 MP8OZ Gas Leak Detector Review

William Harvey #039375 MP8OZ Gas Leak Detector Feature

• William Harvey #039375 MP8OZ Gas Leak Detector
• WILLIAM H HARVEY

Master Plumber, 8 OZ, Gas Leak Detector, Detect Any Gas Leak In Just A Few Seconds On All Types Of Tubing, Valves, Cylinders, Pressurized Tanks Or Any System Under Air, Gas Or Oxygen Pressure.

DEWALT DCT414S1 12-Volt Max Infrared Thermometer Kit

DEWALT DCT414S1 12-Volt Max Infrared Thermometer Kit Review

DEWALT DCT414S1 12-Volt Max Infrared Thermometer Kit Feature

• Non-contact temperature measurements (-20°F to 932°F) for ease of use over distance and accuracy
• LED hot (red) and cold (blue) indicator for visual and/or audio alarm for quickly locating trouble spots
• Data storage for recording max, min, and average temperatures
• Adjustable emissivity improves accuracy across a wide range of materials

The DEWALT 12-Volt Max Infrared Thermometer is designed to provide non-contact, laser-guided temperature readings from safe distances. The thermometer has a range of up to nearly 1000 degrees Fahrenheit and adjustable emissivity for accuracy in a variety of workplace environments. A color-coded display, audio alarm, and ergonomic design make taking quick and accurate temperature readings of precise areas easier.

12-Volt Max Infrared Thermometer Kit At a Glance: Temperature range of over 950 degrees Fahrenheit 12:1 targeting accuracy for results within +/-1.5% Adjustable emissivity for use with range of materials Back-lit, color-coded LED screen with audible alarm Three-year limited warranty; one-year free service contract

Audible alarm alerts you to potential trouble spots. View larger.

Non-Contact Recording Functionality
The DEWALT thermometer is sensitive to temperatures from -20 to 932 degrees Fahrenheit, so you'll find it suitable for most construction site applications. Because it uses non-contact technology and is programmed to store its readings, you can operate the DEWALT from safe distances and still record maximum, minimum, and average temperatures.

Class II Infrared Laser for Precision
The thermometer uses a Class II infrared laser for 12:1 targeting accuracy. Its adjustable emissivity means you can tailor it to work with various metals and materials and still get results accurate to within 1.5 percent.

Color-Coded Display for Easy Use
The DEWALT features a backlit screen so it's easy to read your data in any light conditions. It also incorporates blue and red numerals onto its LED screen to help you recognize temperature changes when comparing readings across a room. The thermometer has an audible alarm to alert you of abrupt changes in temperature, so you'll be able to identify potential trouble spots.

The DEWALT's ergonomic design makes the thermometer easy to hold and operate, while its base-mounted, 12-volt lithium-ion battery pack allows it to stand conveniently upright.

Warranty Information
This DEWALT tool comes with a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
Thermometer, lithium-ion battery, charger, and box.

Infrared laser lets you pinpoint your target.

DEWALT's new 12 Volt MAX infrared thermometer is ideal for electricians, plumbers, remodelers and HVAC contractors tasked with scanning for temperature changes and locating potential trouble spots on the jobsite. With the ability to measure temperatures from negative 20 degrees Fahrenheit to 932 degrees Fahrenheit and a patent-pending LED hot and cold spot indicator, the IR thermometer provides visual and audio alarms to alert contractors in noisy work conditions. Maximum initial battery pack voltage (measured without a workload) is 12 volts. Measured under a workload, nominal voltage is 10.8. Includes a 12V Max Li-Ion Battery (DCB120F). note on battery technology: When batteries are being charged and discharged a chemical reaction is taking place, and if it is too hot or cold the chemical reaction is disturbed causing a loss of runtime. when using the battery in cold climates to put the battery on charge first or do a couple quick applications to get it warmed up. For optimum performance, do not store batteries in areas where the temperature drops below 40 degrees Fahrenheit.

Superior Signal Accutrak VPE Ultrasonic Leak Detector

Superior Signal Accutrak VPE Ultrasonic Leak Detector Review

Superior Signal Accutrak VPE Ultrasonic Leak Detector Feature

• Detects ANY gas
• Will NOT false alarm from residues, or stray glasses
• No tips to clean or sensors to replace
• Detects vacuum leaks

Superior Signal Accutrak VPE Ultrasonic Leak Detector

The AccuTrak VPE is compact, and designed for one hand operation. Comes with flexible wave guide for hard to reach areas. Other applications include the detection of bearing wear, leaks in ductwork, leaking steam traps & valves, vacuum leaks, & electrical arcing. Unique acoustic design of our precision probe maximizes sensativity for contact applications such as bearing and valve analysis.

AccuTrak is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technique called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characterstics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

This is no sniffer- It is not affected by the wind and will NOT false alarm from any residues or stray gasses. It detects ANY type of refrigerant gas including nitrogen, with no tips to clean or sensors to replace. It does not require the introduction of tracer gases into the system, which can be ozone depleting when vented and can also be harmful to ones health. It detects both vacuum and pressure leaks.

Specifications:

Nominal Sensativity -80db V/µBar

Frequency Response 38 to 42 KHz

Display ten element bar graph

Audio Output 0 to 4 KHz

Housing Durable PVC/Aluminum

Power 9V cell

Battery Life 15 Hours (continuous)

Headset Dynamic 32 Ohm

Size 4.56" x 2.40" x 0.866"

Weight 4.5 oz.

Warranty 1 Year

Includes: Accutrak VPE Ultrasonic Leak Detector, Touch Probe Accessory, Flexible Wave Guide, Headphones, 9V battery and Users Manual in a hard carrying case. 

Tips For Leak Detector 3 Tips & 3 Protectors

Tips For Leak Detector 3 Tips & 3 Protectors Review

Tips For Leak Detector 3 Tips & 3 Protectors Feature

• Tips for TIF Refrigerant Leak Detectors.
• Dimension: 1.9 x 1.4 x 0.3.

TIF555 Features and Benefits: -Tips for TIF Refrigerant Leak Detectors .-1 yr warranty on material and workmanship.

General Tools NGD7201 Precision Gas Leak Detector "Gas Dog"

General Tools NGD7201 Precision Gas Leak Detector "Gas Dog" Review

General Tools NGD7201 Precision Gas Leak Detector "Gas Dog" Feature

• Precision detection of combustible gas leaks.
• Sensitive to very low levels of methane, propane, butane and hydrogen
• Sensitivity 40ppm
• LED and acoustic indicators
• Kit includes 4AA batteries, stainless steel probe and molded hard case

* Low battery warning * Unique compact ergonomic design * Variable alarm set point * Detection range: Methane: 120ppm - 1920 ppm Propane: 40ppm - 640ppm * Warm-up time: < 60 seconds * Response time: < 2 seconds * Sensitivity: 40ppm * Flexible probe length: 18" (465mm) * Indicator: Acoustic intermittent beep and visual LED. * Operating temperature range: 23 to 113°F (-5 to 45°C) * Auto power off: About 10 minutes * Power: 4 AA Batteries * Dimensions: 6.9" x 2.8" x 1.5" (175 x 70 x 38mm) === Included Accessories: * 4 - AAA Batteries * 1 - Stainless flexible probe * 1 - Hard blow mold case

SEPTLS7478OZSNOOP - Leak Detectors

SEPTLS7478OZSNOOP - Leak Detectors Review

SEPTLS7478OZSNOOP - Leak Detectors Feature

• Physical Form - Liquid
• Capacity Vol. - 8 oz
• Temp. Range - 27.0 °F [Min], 200.0 °F [Max]
• Applications - Gases
• Brand Name - Snoop®

Non-Toxic, non-flammable. Does not collect dust. Does not contain chlorine, aliphalic amines, or ammonium compounds.

Swann Sw351-Wla Water Leak Alarm

Swann Sw351-Wla Water Leak Alarm Review

Swann Sw351-Wla Water Leak Alarm Feature

• Protects Home Or Property From Water Damage
• Monitors Areas With Potential For Water Leaks
• Alarm Is Triggered When Water Leak Or Flooding Is Detected
• Unique Slim, Weather-Resistant Design
• Multidirectional Sensor For Fast, Accurate Detection

Swann Sw351-Wla Water Leak Alarm

Diversitech® WS-1 - Wet Switch Flood Detector

Diversitech® WS-1 - Wet Switch Flood Detector Review

Diversitech® WS-1 - Wet Switch Flood Detector Feature

• Hydrophilic Pad - A high tech polymeric fiber quickly draws water into the sensor array using proven capillary technology
• Stainless Steel Sensor Array - A high tech array of multiple stainless steel sensors detects even a minimal amount of water drawn into the hydrophilic pad
• Double Throw Relay - Allows for wiring to interrupt system and to sound an alarm (by others) when moisture is detected
• The Wet Switch is designed to interrupt the operation of cooling systems. However, it is a water activated switch and can be used in a variety of other applications
• Standard 24VAC control

The wet switch flood detector is a solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. It now has a built-in test and reset button for easier installation. It turns the system off when moisture due to condensate or drain leaks is detected. One or two drops will cause Wet Switch to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the Wet Switch is activated and has turned the unit off. Re-set simply by drying the absorbent pad with a paper towel and pressing the reset switch. Connects to 24 VAC. More than one unit may be connected to a system. 2 amp contact rating. Simple 5 wire installation. The Wet Switch is placed into the secondary drain pan - a normally dry pan. If the primary drain pan fails, condensate water will overflow into the secondary drain pan. Upon sensing moisture, the Wet Switch will turn the system off (typically the cause of the condensing water) to help prevent damage to carpets, walls, woodwork, ceilings, and other property.

Skylink WA-318T Household Alert Water Sensor

Skylink WA-318T Household Alert Water Sensor Review

Skylink WA-318T Household Alert Water Sensor Feature

• Notifies you when water starts to leak
• Requires the Household Alert Receiver
• Easy to set up

Alerts you when there is water present and potential flooding. Supervised Sensor: monitors the sensors and their battery condition automatically. Suitable for your sump, washing-machine, hot water heater, bathtub, etc. Operating range: 300 feet. Lithium battery included. Easy to set up.